brumbypumps.blogspot.com
Brumby Pumps: Find well/bore depth and static water level.....
http://brumbypumps.blogspot.com/2009/11/find-wellbore-depth-and-static-water.html
Sunday, November 15, 2009. Find well/bore depth and static water level. To find the static water level, lower a small bottle (with a little sand or gravel in it to give it weight if it is a plastic bottle) into the bore/well on the end of a LIGHT string until you feel it hit the water surface. Then mark the string at the top of the bore/well, pull it out and measure the length of the string that was down the well/bore. April 17, 2012 at 11:33 AM. November 2, 2012 at 7:02 AM. November 25, 2012 at 9:12 PM.
brumbypumps.blogspot.com
Brumby Pumps: Secure....
http://brumbypumps.blogspot.com/2009/11/secure.html
Tuesday, November 3, 2009. If installing the Brumby pump in a bore or well, the piping needs to be secured at the top to the bore/well casing for 2 reasons:. If the bore/well is deep, the pump may bury itself in the mud in the bottom and you won't get any water up as a result. The pump should be set just off the bottom, but not so deep that the compressor doesn't have the power to lift the water. Subscribe to: Post Comments (Atom). This blog is intended to be a helpful tool and resource for people to use.
brumbypumps.blogspot.com
Brumby Pumps: January 2011
http://brumbypumps.blogspot.com/2011_01_01_archive.html
Monday, January 31, 2011. You may think that running a compressor to operate your Brumby pump is going to cost you a fixed amount of money in energy - no matter what. Well, there are things you can do to not only reduce your running costs, but also potentially increase the life of your compressor. To find out more, please follow this link to find a set of tips to help reduce your costs -. Subscribe to: Posts (Atom). This blog is intended to be a helpful tool and resource for people to use.
brumbypumps.blogspot.com
Brumby Pumps: Keep it clean
http://brumbypumps.blogspot.com/2009/11/keep-it-clean.html
Tuesday, November 10, 2009. The following is useful for ANY air lines, but if you are using the L2 or S2 pump WITH a controller, it is important to ensure that the air lines are clean before connecting and commissioning the unit. If any debris is present it can end up in the flow switches and solenoid valves in the controller and jam them up, so the controller is unable to operate correctly. The way to ensure clean lines is 2-fold:. Once clean, connect up the controller and start pumping. I first install...
brumbypumps.blogspot.com
Brumby Pumps: August 2010
http://brumbypumps.blogspot.com/2010_08_01_archive.html
Thursday, August 5, 2010. Windmill and No Wind. We were talking to a farmer recently, who had bores/wells equipped with windmill pumps around his large farm. He was looking for a solution that allowed him to keep running his existing windmills and still deliver water when the wind wasn’t blowing. He had sheep that required water and on long wind-still periods his tanks got low or ran dry. This meant he needed a back-up for his windmill pump. You can also find us on Facebook. Subscribe to: Posts (Atom).
brumbypumps.blogspot.com
Brumby Pumps: Size or Fluid volume in a Tank
http://brumbypumps.blogspot.com/2014/04/size-or-fluid-volume-in-tank.html
Sunday, April 6, 2014. Size or Fluid volume in a Tank. If you don't know how to work out the amount of water left in a tank (vertical or horizontal) or you want to work out the actual size of a tank, here is a great tool that makes it easy: http:/ www.1728.org/verttank.htm. Work out water in tank. July 3, 2014 at 2:08 AM. Its nice information about fuel volume tank. The fuel depends of tank and its quality. July 16, 2014 at 3:47 AM. So it is important to us to have all the information about such parts.
brumbypumps.blogspot.com
Brumby Pumps: November 2009
http://brumbypumps.blogspot.com/2009_11_01_archive.html
Sunday, November 15, 2009. Find well/bore depth and static water level. To find the static water level, lower a small bottle (with a little sand or gravel in it to give it weight if it is a plastic bottle) into the bore/well on the end of a LIGHT string until you feel it hit the water surface. Then mark the string at the top of the bore/well, pull it out and measure the length of the string that was down the well/bore. Tuesday, November 10, 2009. The way to ensure clean lines is 2-fold:. If installing th...
brumbypumps.blogspot.com
Brumby Pumps: Windmill and No Wind
http://brumbypumps.blogspot.com/2010/08/windmill-and-no-wind.html
Thursday, August 5, 2010. Windmill and No Wind. We were talking to a farmer recently, who had bores/wells equipped with windmill pumps around his large farm. He was looking for a solution that allowed him to keep running his existing windmills and still deliver water when the wind wasn’t blowing. He had sheep that required water and on long wind-still periods his tanks got low or ran dry. This meant he needed a back-up for his windmill pump. You can also find us on Facebook. The Brumby Pump is a unique a...
tavalve.net
Our Suppliers | Valves, Controls, Actuators & More!
http://www.tavalve.net/our-suppliers
Valve Terms and Meanings. Aquatrol – Asco – Ashcroft – A-T Controls – Cash Valve. Conbraco – Dk-Lok – Dwyer – Fisher – Gadren – Hayward. Kerick – Kunkle – Newco/OIC – Saunders – Smith – Stockham. Techno – Titan – Top Line – Triac – Turck – Valtorc Valves. Velan – Ward – Westlock – Xomox. ValvesAndActuators.com is our main supplier of Valve Actuator. And Valve Actuator Parts. With valves from the best suppliers, ValvesAndActuators.com is a proud member of ValveWorld and GlobalSpec. Venta de cialis online.
SOCIAL ENGAGEMENT