colinbroad.blogspot.com
Keep in Sync: TMC-1 Mechanical Switch Noise in Talkback
http://colinbroad.blogspot.com/2015/04/tmc-1-mechanical-switch-noise-in.html
A new User Interface design never survives contact with it's first users! Thursday, 23 April 2015. TMC-1 Mechanical Switch Noise in Talkback. I received a report that the mechanical switch noise on the TMC-1 when switching was annoying. Initially I assumed that the problem was switch On (easy to fix with a short delay) but the problem was that the noise from the switch release was too loud. This reduces the noise but does not completely remove it. There are two alternative approaches you can try. When co...
colinbroad.blogspot.com
Keep in Sync: 01 April 2015
http://colinbroad.blogspot.com/2015_04_01_archive.html
A new User Interface design never survives contact with it's first users! Wednesday, 1 April 2015. TMC-1-Penta and Dolby Atmos 7.1.4 and 9.1.2. Today I revised the specification of the TMC-1-Penta to cope with 12 channel Stems. To increase the channel count from 10 to 12 it was necessary to remove one of the stereo cue outputs. The revised specification for the mixer is as follows. Stem/Input Summing - 12. Four Stereo Cues - 8. Mono/Stereo main mix - 2. 71/51 Downmix - 8. Stereo Downmix - 2.
colinbroad.blogspot.com
Keep in Sync: 11 March 2015
http://colinbroad.blogspot.com/2015_03_11_archive.html
A new User Interface design never survives contact with it's first users! Wednesday, 11 March 2015. The complete Digital I/O and Monitoring Solution. The DAD AX32/NTP Penta combines direct connection to Pro Tools HD/HDX/HD Native systems with superb A2D/D2A converters, Madi, AES and SPI. The combination of the DAD AX32 / NTP Penta with the TMC-1-Penta provides a cost effective digital I/O and monitoring solution for any studio. Visit NTP Technology on the Sanken/Plus 24 stand at NAB - C4051 Hall C.
colinbroad.blogspot.com
Keep in Sync: TMC-1-Penta and Dolby Atmos 7.1.4 and 9.1.2
http://colinbroad.blogspot.com/2015/04/tmc-1-penta-and-dolby-atmos-714-and-912.html
A new User Interface design never survives contact with it's first users! Wednesday, 1 April 2015. TMC-1-Penta and Dolby Atmos 7.1.4 and 9.1.2. Today I revised the specification of the TMC-1-Penta to cope with 12 channel Stems. To increase the channel count from 10 to 12 it was necessary to remove one of the stereo cue outputs. The revised specification for the mixer is as follows. Stem/Input Summing - 12. Four Stereo Cues - 8. Mono/Stereo main mix - 2. 71/51 Downmix - 8. Stereo Downmix - 2.
colinbroad.blogspot.com
Keep in Sync: 28 September 2014
http://colinbroad.blogspot.com/2014_09_28_archive.html
A new User Interface design never survives contact with it's first users! Sunday, 28 September 2014. This week I have been setting up our new Monitor Remote (Now called the TMC-1) on the XMon. I have heard some bad reports about XMon so I wanted to be sure that I knew how to optimise the setup. XMon cannot be considered in isolation but as part of a monitor system that consists of the XMon, Power amps and Speakers. The factory default settings of the TMC-1 XMon controller are as follows. Colin Broad Amps...
colinbroad.blogspot.com
Keep in Sync: Yosemite and Latency II - More Problems
http://colinbroad.blogspot.com/2015/05/yosemite-and-latency-ii-more-problems.html
A new User Interface design never survives contact with it's first users! Friday, 15 May 2015. Yosemite and Latency II - More Problems. Last week I had a customer report more problems with Yosemite so I tried to replicate my last results - and failed! I then re-installed Yosemite from scratch and still failed! To help make tests I wrote a small test program which measures the total time to send and receive a message. Http:/ www.colinbroad.com/cbsoft/usb422/latency-mac.zip. Colin Broad Amps Fellow. When c...
colinbroad.blogspot.com
Keep in Sync: 23 April 2015
http://colinbroad.blogspot.com/2015_04_23_archive.html
A new User Interface design never survives contact with it's first users! Thursday, 23 April 2015. TMC-1 Mechanical Switch Noise in Talkback. I received a report that the mechanical switch noise on the TMC-1 when switching was annoying. Initially I assumed that the problem was switch On (easy to fix with a short delay) but the problem was that the noise from the switch release was too loud. This reduces the noise but does not completely remove it. There are two alternative approaches you can try. When co...
c2-cine.co.uk
c2-cine Main Page
http://c2-cine.co.uk//index.html
C2-Cine, UK Distributers for. Timecode, Biphase, Serial Control. 16/35mm 2K/4K Film Scanner. EMail: sales@c2-cine.co.uk, Tel: 44 (0)118 3240 262, Fax: 44 (0) 118 9320 346. Loddonside, Lands End House, Beggars Hill Road, Charvil, Berks, RG10 0UD. URL http:/ www.c2-cine.co.uk. Page maintained by Colin Broad.
c2-cine.co.uk
c2-cine Main Page
http://c2-cine.co.uk/index.html
C2-Cine, UK Distributers for. Timecode, Biphase, Serial Control. 16/35mm 2K/4K Film Scanner. EMail: sales@c2-cine.co.uk, Tel: 44 (0)118 3240 262, Fax: 44 (0) 118 9320 346. Loddonside, Lands End House, Beggars Hill Road, Charvil, Berks, RG10 0UD. URL http:/ www.c2-cine.co.uk. Page maintained by Colin Broad.
SOCIAL ENGAGEMENT