forum.elektronicastynus.be

elektronicastynus.be

Elektronica Stynus > Projecten

http://www.elektronicastynus.be/Projecten/index.php

Raquo; Over mij. Raquo; Taal / Language:. SC Analyser 2005 (Halfgeleider-tester). Servo Positioning Unit (Stage). PS2 Controller to USB Converter. Voeding en - 0-70V @ 5A. AMA-16 Freesmachine CNC Ombouw. Sweex LB000021 Router Ombouw. Projecten and schema's van mij die gepubliceerd zijn:. Elektuur Juli-Augustus 2006 "Alternatieve halogeenvoeding". Valid XHTML 1.0.

en.elektronicastynus.be

Elektronica Stynus > Projects > Safety Transformer V2

http://en.elektronicastynus.be/projects/58

Raquo; About me. I had a external light bulb in series with my previous safety transformer to limit the output/short circuit current. This gave the problem that sometimes a bulb would fall on the ground with changing it. So I decided to make a new version with the light bulbs inside. The previous version had a 140VA transformer and sometimes that was not enough. So I build a new one with a 300VA transformer. To power these 3 pcb's I made a separate power supply pcb. It delivers 12V, -12V and 5V. As you c...

en.elektronicastynus.be

Elektronica Stynus > Projects > AMA-16 Mill CNC Conversion

http://en.elektronicastynus.be/projects/84

Raquo; About me. AMA-16 Mill CNC Conversion. A while ago I decided to convert my AMA-16 milling. Machine to cnc. For this machine I bought some stepper drivers to save the time of building them myself. I have mounted these drivers together with some power supplies and relays in a control box. Unfortunately I have not made many pictures during the build process. Bottom side vent openings:. There are 3 ventilation openings on top. I protected these with air filters to keep out the dust. Valid XHTML 1.0.

en.elektronicastynus.be

Elektronica Stynus > Projects > Dummyload

http://en.elektronicastynus.be/projects/77

Raquo; About me. I started this project a while ago but did not post it back then because of the lack of time. The point of this project was a simple variable load to test power supply's. As an extra I put in a voltage, current and temperature measurement circuit. The power is converted in to heat via 8 2N3055 transistors. Each transistor has his own driver and current feedback. This way I can read then individually in the pic and therefore can check if they are all still in a working state. R4 is added ...

en.elektronicastynus.be

Elektronica Stynus > Projects > Resistor Decade Box

http://en.elektronicastynus.be/projects/83

Raquo; About me. I was thinking about making a resistor decade box, but I found the rotary switches that are used in these most of the time rather expensive and a bit old fashioned. That's why I decided to use a rotary encoder and select the resistors with a microcontroller. R22, R23, R24. R8, R9, R10. R15, R16, R17. K10, K11, K12, K13, K14, K15, K16. R8, R9, R10. R15, R16, R17. K10, K11, K12. Everything mounted in the enclosure:. Code in the microcontroller:. Data Pin = PORTA. DispWaarde[7] As Byte Dim.

en.elektronicastynus.be

Elektronica Stynus > Projects > Safety Transformer V3

http://en.elektronicastynus.be/projects/59

Raquo; About me. I came across an ad form Stefan Haesen, he had a bunch of transformers and motors for sale at a low prize. I reacted and a few days later the trunk of my car was full. Thanks Stefan! Between the transformers there as a 1000VA safety transformer and a 1500VA variac. I decided to build a variable safety transformer with these. For the case I used an old pc case in which I made a chassis. I also have put some wheels underneath it. The measuring print will be the same as in V2. After this I ...

en.elektronicastynus.be

Elektronica Stynus > News

http://en.elektronicastynus.be/news

Raquo; About me. 19/10/14 AMA-16 Mill CNC Conversion. 06/10/14 Update Safety transformer V3. 26/09/14 Resistor Decade Box. 04/05/13 Update Safety transformer V2. 04/05/13 Update Safety transformer V3. 29/04/12 Update DG10F1 VFD Clock. 24/12/11 Update UV-Exposure box V2. 10/12/11 Started a webshop. 04/09/11 Update PCB Drill. 16/08/11 Update UV PCB Exposure box V3. 26/07/11 UV PCB Exposure box V3. 22/06/11 Spray Etching Tank. 25/04/11 PS2 Controller to USB Converter. 16/04/11 Update IN-14 Nixie Clock.

en.elektronicastynus.be

Elektronica Stynus > links

http://www.en.elektronicastynus.be/links

Raquo; About me. General electronics sites Dutch. General electronics sites English. Electronic shops and manufacturers. Valid XHTML 1.0.

en.elektronicastynus.be

Elektronica Stynus > Copyright

http://www.en.elektronicastynus.be/copyright

Raquo; About me. History off the site. In April 2005 fusions schematheek.com and Elektronica Schema's Online together to 1 big Schematheek (what means circuit library in English). Because of that I thought that the circuits had to go off my site and on the Schematheek site. After that this site became my project site. This site is now the second version and the Schematheek is on its third version. The blog came online in December 2010. The following cookies are used:. Valid XHTML 1.0.

en.elektronicastynus.be

Elektronica Stynus > Guestbook

http://www.en.elektronicastynus.be/guestbook

Raquo; About me. Click here to leave a message. Page 1 of 1 (6 messages in total). Saturday 29 December 2012 - 13:47:09. I am badly stuck up with a remote controlling project which uses 12F675 and Sony remote handset. Has 3 loads. 2 lights and one fan with dimmer. Can you please help me out with the code for the same. I have the circuit and description about how it works. But 2 of my friends have failed in the same and it is now since more than a year now the day i started it. Friday 1 July 2011 - 0:40:06.