wemos.cc
D1 mini Shields | WEMOS Electronics
https://www.wemos.cc/product/d1-mini-shields.html
Skip to main content.
wemos.cc
SHT30 Shield | WEMOS Electronics
https://www.wemos.cc/product/sht30-shield.html
Skip to main content. I2C Interface digital temperature and humidity sensor shield based SHT30. ( Buy it. Two user selectable addresses. Typical accuracy 3%RH and 0.3 C. Https:/ github.com/wemos/WEMOS SHT3x Arduino Library.
wemos.cc
Welcome to WEMOS.CC | WEMOS Electronics
https://www.wemos.cc/blog/welcome-wemoscc.html
Skip to main content. Welcome to WEMOS.CC. Welcome to WEMOS.CC.
wemos.cc
Tutorials | WEMOS Electronics
https://www.wemos.cc/tutorial
Skip to main content. Get started in Arduino. Get started in Arduino. Get started in NodeMCU. Get started in NodeMCU. Getting started with WEMOS XI. USB TO Serial Module (Recommend WEMOS CH340G Breakout. How to find Chip ID. How to find Chip ID. How to find your "Sketchbook Directory".
wemos.cc
Verify Products | WEMOS Electronics
https://www.wemos.cc/verify_products
Skip to main content. How to find Chip ID?
wemos.cc
Raspberry Pi HATs | WEMOS Electronics
https://www.wemos.cc/Raspberry_Pi_HATs
Skip to main content. WEMOS GPIO Reference Card. WEMOS GPIO Reference Card. Subscribe to Raspberry Pi HATs.
wemos.cc
SHT30 Shield is release. | WEMOS Electronics
https://www.wemos.cc/blog/sht30-shield-release.html
Skip to main content. SHT30 Shield is release. SHT30 Shield is release. SHT30 Shield is release. Buy it from here.
wemos.cc
D1 mini | WEMOS Electronics
https://www.wemos.cc/product/d1-mini.html
Skip to main content. The D1 mini is a mini wifi board based on ESP-8266EX. 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0. 1 analog input(3.2V max input). A Micro USB connection. Get started in Arduino. Get started in NodeMCU. 1(Max input: 3.2V). Analog input, max 3.3V input. IO, 10k Pull-up. IO, 10k Pull-up, BUILTIN LED. IO, 10k Pull-down, SS. All of the IO pins have interrupt/pwm/I2C/one-wire support except D0. All of the IO pins run at 3.3V.
wemos.cc
D1 | WEMOS Electronics
https://www.wemos.cc/product/d1.html
Skip to main content. An Arduino UNO Compatible wifi board based on ESP8266EX. 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except for D0. 1 analog input(3.2V max input). Power jack, 9-24V power input. Get started in Arduino. Get started in NodeMCU. 1(Max input: 3.2V). Analog input, max 3.3V input. IO, 10k Pull-up. IO, 10k Pull-up, BUILTIN LED. IO, 10k Pull-down, SS. All of the IO pins have interrupt/pwm/I2C/one-wire support except D0. All of the IO pins run at 3.3V.
wemos.cc
D1 mini Shields | WEMOS Electronics
https://www.wemos.cc/D1-mini-Shields
Skip to main content. WS2812B RGB Shield, a intelligent control RGB (16777216 colors) LED light source. Relay Shield, use relay to control other equipment. 64x48 pixels (0.66 Across) OLED Shield with I2C. I2C dual motor driver shield. Dual Base for D1 mini (Pro). Digital temperature and humidity sensor shield based DHT22. I2C Interface digital temperature and humidity sensor shield based SHT30. Micro SD Card Shield. Micro SD Shield is a shield to use Micro SD(TF) card for D1 mini.