saintferrer.com
News Archive - SaintFerrer SaintFerrer
http://www.saintferrer.com/news
Saint Ferrer Assemble and Protect. ASME Pressure Vessels & Piping Conference to take place in the City of Lights. September 17th, 2013. What better city to host the 2013 ASME PVP Conference than one of the most historically, architecturally, and culturally rich cities of the world? Rules for Selecting Components. Installation & Inspection Practices. Overview of Flange Gasket and Bolting Selection Process. Overview of Flange Isolation Selection Process. COLT Selection Process Tables. Use tcf for comparing...
saintferrer.com
Technical Partners - SaintFerrer SaintFerrer
http://www.saintferrer.com/technical-partners
Saint Ferrer Assemble and Protect. Rules for Selecting Components. Installation & Inspection Practices. Overview of Flange Gasket and Bolting Selection Process. Overview of Flange Isolation Selection Process. 8220;TCF” Tightness Class Factor for Expressing Product Performance. COLT Selection Process Tables. VOLT Selection Process Tables. Flange Gasket and Bolting. Flange Gasket and Bolting Overview. Product Description with Submittal. Flange Gasket and Materials Overview. Use tcf for comparing performance.
saintferrer.com
Use tcf for comparing performance - SaintFerrer SaintFerrer
http://www.saintferrer.com/use-tcf-for-comparing-performance
Saint Ferrer Assemble and Protect. Use tcf for comparing performance. Westermann Bolting Technology Co. discovers a way to measure the performance [leak rate] of the Bolted Flanged Joint. Using their newly created COLT Selection Process Westermann chose components then calculated their performance using the method on analyzing joint tightness as described in the paper PVP2008-61561 On the Operating Tightness of B16.5 Flanged Joints by James R. Payne and robert W. Schneider This calculation cr...1) Low st...
saintferrer.com
COLT™ Selection Process Tables - SaintFerrer SaintFerrer
http://www.saintferrer.com/simple/coltselection-process-tables
Saint Ferrer Assemble and Protect. COLT Selection Process Tables. Using the COLT Selection Process. The selection process involves collecting information about your application and code allowance. To help with this process, you can use the original Saint Ferrer. COLT Selection Process Table as a guide for selection:. Code allowance or standard suitability. Location and type of flange. COLT Selection Process Tables. As described in the COLT Selection Process Tables, the satisfactory (S) use of Saint Ferrer.
saintferrer.com
Flange Gasket & Bolting Series Description - SaintFerrer SaintFerrer
http://www.saintferrer.com/all-saint-ferrer-products/flange-gasket-bolting/series-description
Saint Ferrer Assemble and Protect. Flange Gasket & Bolting Series Description. Low strength components. The LS series is suitable for many ASME B31.1 Non-Boiler External Piping (NBEP) locations with ASME B16.5 flanges and most AWWA applications. LS-CRES series is for the piping professional wanting ASME listed. SS series contains non listed. But allowed by strength definition. Unlike the LS-CRES Series, these commercially available stainless steel bolts are, by specification, not required to be carbi...
saintferrer.com
Flange Isolation - SaintFerrer SaintFerrer
http://www.saintferrer.com/products/flange-isolation
Saint Ferrer Assemble and Protect. Overview of the Flange Isolation Selection Process. Flange Isolation products reduce corrosion caused by electrical currents. In addition to creating and maintaining a seal, the purpose of the isolation product is to insulate one flange from another or to isolate corrosion causing electrical current to a section of pipe; the latter being employed with cathodic protection systems such as impressed current or anode beds. Click Here to View VOLT Selection Process. COLT Sel...
saintferrer.com
Flange Gasket and Bolting Overview - SaintFerrer SaintFerrer
http://www.saintferrer.com/flange-gasket-and-bolting-overview
Saint Ferrer Assemble and Protect. Flange Gasket and Bolting Overview. Overview of the Flange Gasket and Bolting Selection Process. Flange gasket and bolting are components of a bolted flanged joint (BFJ) used in ASME B31.1 and AWWA applications. Proper selection and installation insures success of the entire bolted flanged joint assembly. The optimization decision includes but is not limited to an expectation of joint tightness, cost of corrosion, materials, documentation, quality control, procurement, ...
saintferrer.com
Authorized Distributors - SaintFerrer SaintFerrer
http://www.saintferrer.com/authorized-distributors
Saint Ferrer Assemble and Protect. Rules for Selecting Components. Installation & Inspection Practices. Overview of Flange Gasket and Bolting Selection Process. Overview of Flange Isolation Selection Process. 8220;TCF” Tightness Class Factor for Expressing Product Performance. COLT Selection Process Tables. VOLT Selection Process Tables. Flange Gasket and Bolting. Flange Gasket and Bolting Overview. Product Description with Submittal. Flange Gasket and Materials Overview. Use tcf for comparing performance.
manufacturing-register.com
| Manufacturing Register
http://www.manufacturing-register.com/categories/fasteners
Search by web reference:. RSS feed for this section. Is a hardware device that mechanically joins or affixes two or more objects together. Jager Solutions, Inc. Manufacturer and distributor of inside/outside plant, cell site and central office installation materials to telecommunications OEM’s, wireless carriers and contractors. Also, a provider of complete turn-key contract manufacturing solutions, …. Greer Industries, Inc. Texas Specialty Fasteners, LP. Westermann Bolt & Gasket Co. Fort Worth TX 76155.