jerseyinstruments.com

omnifaceter.net

Omni Disassembly | The Omni-E Faceting Machine Laid Bare

http://www.omnifaceter.net/category/omni-disassembly

The Omni-E Faceting Machine Laid Bare. Your Omni-E Faceting Machine Alignment and Modification Resource. Category Archives: Omni Disassembly. Photos of the Omni-E Faceting Machine being disassembled. November 22, 2008. So after all this time, why would I suddenly decide to take my Omni Faceting Machine’s most delicate components apart? If you’ve been following my Blog entries you’ll remember the Another Frustration – Quill Runout post. To be to the … Continue reading →. Omni Swing Arm and Mast Disassembly.

omnifaceter.net

Disassembly First Steps | The Omni-E Faceting Machine Laid Bare

http://www.omnifaceter.net/category/omni-disassembly/disassembly-first-steps

The Omni-E Faceting Machine Laid Bare. Your Omni-E Faceting Machine Alignment and Modification Resource. Category Archives: Disassembly First Steps. Omni Disassembly First Steps. June 8, 2008. This section details how to disassemble the various parts of the Omni Faceting Machine. Note: Disassembling your machine will void your warranty. I am in no way responsible for any eventualities should you decide to disassemble your machine. First steps: … Continue reading →. Slipping Faceting Head Angle Problem.

omnifaceter.net

Slipping Faceting Head Angle Problem | The Omni-E Faceting Machine Laid Bare

http://www.omnifaceter.net/slipping-faceting-head-angle-problem

The Omni-E Faceting Machine Laid Bare. Your Omni-E Faceting Machine Alignment and Modification Resource. Crap Customer Services from Bay Centerless. Slipping Faceting Head Angle Problem. January 2, 2015. Here is another fix for the Omni-e as sent to me by another owner, Christa Starr (thanks and sorry for the delay in posting! Here’s some photos and her commentary. I thought the encoder was broken because every time I tapped the head against the hard stop / fine angle adjustment knob the digital angle re...

omnifaceter.net

Crap Customer Services from Bay Centerless | The Omni-E Faceting Machine Laid Bare

http://www.omnifaceter.net/crap-customer-services-from-bay-centerless

The Omni-E Faceting Machine Laid Bare. Your Omni-E Faceting Machine Alignment and Modification Resource. Avoid Sierra Gems – Unethical Ripoff Company. Slipping Faceting Head Angle Problem →. Crap Customer Services from Bay Centerless. March 17, 2014. Well, I hate to do this but I’m getting totally frustrated and pissed-off with manufacturers who just have no idea about customer service. You all know what I think of companies with bad customer service, so here’s another one for the Wall of Shame&#46...

omnifaceter.net

Aligning the Platen | The Omni-E Faceting Machine Laid Bare

http://www.omnifaceter.net/category/omni-adjustments/aligning-the-platen

The Omni-E Faceting Machine Laid Bare. Your Omni-E Faceting Machine Alignment and Modification Resource. Category Archives: Aligning the Platen. How to align the Omni Platen to the Faceting Head. June 9, 2008. Disclaimer: performing this procedure may void your warranty. Proceed at your own risk. Warning: this is a slow and tedious process. If you are not mechanically inclined, think wrenches can be used as hammers or have a short fuse — … Continue reading →. Slipping Faceting Head Angle Problem.

omnifaceter.net

Omni Adjustments | The Omni-E Faceting Machine Laid Bare

http://www.omnifaceter.net/category/omni-adjustments

The Omni-E Faceting Machine Laid Bare. Your Omni-E Faceting Machine Alignment and Modification Resource. Category Archives: Omni Adjustments. How to adjust and align the Omni-E Faceting Machine. June 9, 2008. Disclaimer: performing this procedure may void your warranty. Proceed at your own risk. Warning: this is a slow and tedious process. If you are not mechanically inclined, think wrenches can be used as hammers or have a short fuse … Continue reading →. June 9, 2008. The Omni-e Dop Problem.

omnifaceter.net

The Omni-e Dop Problem | The Omni-E Faceting Machine Laid Bare

http://www.omnifaceter.net/the-omni-e-dop-problem

The Omni-E Faceting Machine Laid Bare. Your Omni-E Faceting Machine Alignment and Modification Resource. New Tourmaline Site by Bruce Fry. Avoid Sierra Gems – Unethical Ripoff Company →. The Omni-e Dop Problem. September 29, 2013. So this is something I haven’t written about yet, but has dogged me for years. It affects all owners of Omni-e, Patriot and Tom Thumb faceting machines as well. So what are your alternatives? Very few. I’ve been chasing around the internet trying to find anyone who is...I am in...

omnifaceter.net

Recommended Suppliers | The Omni-E Faceting Machine Laid Bare

http://www.omnifaceter.net/recommended-suppliers

The Omni-E Faceting Machine Laid Bare. Your Omni-E Faceting Machine Alignment and Modification Resource. I’ve had a few people ask me where I’ve been getting some of my supplies and what accessories I use. So here is a list of suppliers I have purchased from and am happy with. I will be adding to this list as I get time and remember who I’ve ordered from. For the record, I have no business relationship with these suppliers other than as a satisfied customer. In no particular order…. Lap is a composite po...

omnifaceter.net

Digital Inaccuracy | The Omni-E Faceting Machine Laid Bare

http://www.omnifaceter.net/category/omni-alignment-problems/digital-inaccuracy

The Omni-E Faceting Machine Laid Bare. Your Omni-E Faceting Machine Alignment and Modification Resource. Category Archives: Digital Inaccuracy. Omni Digital Encoder Drift. April 5, 2009. Over the past year and a bit I’ve heard from several people who own Omni-E faceting machines who have trouble with their digital angle readout spontaneously changing degrees without rhyme or reason. I had not experienced that until recently and … Continue reading →. Slipping Faceting Head Angle Problem.