bjorkell.se
Köpenhamn
http://www.bjorkell.se/Kopenhamn.htm
Besök i Köpenhamn, augusti 2011. Det finns några affärer i Köpenhamn som säljer miniatyrer. Nörregade 30. Fina presenter och bra sortiment av miniatyrer. Frederiksborggade 23, har allt för hobby inklusive mycket för dockskåp. Souvenirbutiken på Höjbro plads ha utökat sitt dockskåpssortiment.
openbikeworks.blogspot.com
OpenBikeWorks: First steps
http://openbikeworks.blogspot.com/2011/12/hubjohn-hits-reallity.html
Designing and building low cost DIY open source cargo bikes. Sunday, December 11, 2011. Last week the HubJohn took its first shaky steps into physical reality. It included a couple of stumbles. Setbacks included Søren running into a tight dealine at work. Forcing us to postpone our shopping trip to Metalcenteret. Secondly the nice man at SKF. Since we were not able to get the aluminum for the full scale bike this week, I picked up some balsa wood at the local hobby shop. Assembly method that we are using.
openbikeworks.blogspot.com
OpenBikeWorks: December 2011
http://openbikeworks.blogspot.com/2011_12_01_archive.html
Designing and building low cost DIY open source cargo bikes. Tuesday, December 13, 2011. Today we are tired and content after our first trip to get materials and tools. In the morning we took measurements on the 3D-model. It added up like this:. Ca 24 meters of aluminum. After that Andreas went and borrowed a Nihola. Cargo bike from the local Irma supermarket. In collaboration with Irma. In Glostrup we passed Harald Nyborg. To pick up some tools for the Bicycle Innovation Lab. Tuesday, December 13, 2011.
stylistnicolineolsen.blogspot.com
STYLIST NICOLINE OLSEN: LET IT SNOW bare indenfor og på lidt plads - moderne snelandskaber DIY
http://stylistnicolineolsen.blogspot.com/2013/11/let-it-snow-bare-indenfor-og-pa-lidt.html
Sunday, November 10, 2013. LET IT SNOW bare indenfor og på lidt plads - moderne snelandskaber DIY. Lidt træt af piberensermænd og vat der fylder i hele stuen. Så forsøg jer i år med et moderne snelandskab, der kan flyttes rundt. Det er super dekorativt og hyggeligt at lave. Der kan bruges, en æske, en tallerken, en lille kuffert, en glaskugle eller bare et konservesglas. Små modeltræer, dyr og mennesker er gode at have ved hånden, fåes fx i http:/ www.model-hobby.dk/. God fornøjelse og JUL. A CUP OF JO.
krmodels.dk
My guestbook - www.krmodels.dk
http://www.krmodels.dk/32340071
Thanks for visiting my website! Please leave a comment to tell me what you think. If you would like me to respond then please leave a note. Klaus. Hjensen@hotmail.com /u eller u fornavn.efternavn@ditfirma.dk /u ." /. Flyt/placér taleboblen på billedet med din mus. Skriv tekst til din talebobbel. OK - Gem talebobbel. Flyt mig med musen! TIP: Få din egen hjemmeside. Prøv GRATIS - klik her. Elsker din tuborg bil, er bare flot, hilsen fra ribe. I like everything you've done! Thanks for letting me see. Hej ri...
blog.brixandersen.dk
Cheap RepRap Cable Guide – blog.brixandersen.dk
http://blog.brixandersen.dk/2012/08/03/cheap-reprap-cable-guide
Cheap RepRap Cable Guide. I’ve come up with a cheap and easy cable guide hack for use with RepRap. 3D printers. The trick is to wrap the electrical wires in sleeving along with a piece of piano wire. I’ve used 0.8 mm piano wire, but anything between 0.5 mm and 1 mm will likely work fine. The photo below shows a close-up of the wrapped electrical wires and piano wire powering the heated bed of my RepRap Prusa Mendel i2. August 3, 2012. 2 thoughts on “Cheap RepRap Cable Guide”. August 7, 2012 at 20:54.
openbikeworks.blogspot.com
OpenBikeWorks: Tools + Materials
http://openbikeworks.blogspot.com/p/tools-materials.html
Designing and building low cost DIY open source cargo bikes. This page will be updated as we go along. Drill with ø 65 mm drill bit and bits for the bolts. Use a drill press if possible. Metal saw (hacksaw), angle grinder, or any other tool that will cut aluminum. Safety equipment. Masks, goggles, gloves etc. Aluminum profiles (extrusions) - square tubes measuring 25 x 25 mm and 2 mm thick. Bolts - 6 mm. Lengths varies. Nuts - 6 mm, self-locking. Paired with the number of bolts. Washers - 6 mm.
