manufacturing-engineer.blogspot.com
Manufacturing Engineer Blog: May 2010
http://manufacturing-engineer.blogspot.com/2010_05_01_archive.html
Sharing manufacturer engineering process skill and information. Monday, May 31, 2010. Hot-Bar Flex cable Design Notices. Is a selective soldering process where connect two pre-fluxed, solder coated parts by heating element, call a thermode, with proper temperature to melt the solder. Applying a pressure and contacting on the soldering target is necessary to melt the solder and insure that components stay in place during cooling. Friday, May 28, 2010. Shipping carton drop/impact test. Tuesday, May 25, 2010.
manufacturing-engineer.blogspot.com
Manufacturing Engineer Blog: July 2012
http://manufacturing-engineer.blogspot.com/2012_07_01_archive.html
Sharing manufacturer engineering process skill and information. Thursday, July 19, 2012. Tuesday, July 10, 2012. Note: This test didn’t include the humidity.). Subscribe to: Posts (Atom). TQRDCE Performance Expectations and Review. Hot-Bar Flex cable Design Notices. Shipping carton drop/impact test. Without dimple Metal dome as keypad contact. I am a Manufacturing Process Engineer (MPE).
manufacturing-engineer.blogspot.com
Manufacturing Engineer Blog: TQRDCE Performance Expectations and Review
http://manufacturing-engineer.blogspot.com/2010/12/tqrdce-performance-expectations-and.html
Sharing manufacturer engineering process skill and information. Thursday, December 2, 2010. TQRDCE Performance Expectations and Review. This is an example that implemnt TRQDCE form for vendor survey. This action plan, which should identify specific actionable plans with owners and due dates, will serve as the focus for the majority of discussions on [DATE]. Progress against these plans will be reviewed on a regular basis (quarterly at a minimum) – towards the continuous improvements in TQRDCE c...Certifi...
blogfuntw.com
部落格經營 | 跟著工作熊玩賺部落格
http://www.blogfuntw.com/operate
Google Blog Search 網誌搜尋. 提供 相關閱讀 降低部落格的 網頁跳出率(Bounce rate). 認識Analytics部落格經營的重要指標 跳出率 與 關鍵字. 認識Analytics部落格經營的重要指標 網頁瀏覽量 與 平均造訪停留時間. Google Analytics的(not set)與(not provided)是什麼. A href= title= abbr title= acronym title= b blockquote cite= cite code del datetime= em i q cite= s strike strong. 46,974] 使用新版Google Map Engine Lit. 42,327] 如何利用Google Map在部落格中製作玩樂遊記. 40,485] 如何使用 Google map 查找經緯度給Mob. 25,656] 如何解決WordPress Error esta. 21,033] 如何申請Facebook應用程式API(APP I. 2016 年 八月 (1). 2016 年 七月 (5).
manufacturing-engineer.blogspot.com
Manufacturing Engineer Blog: Shipping carton drop/impact test
http://manufacturing-engineer.blogspot.com/2010/05/shipping-carton-dropimpact-test.html
Sharing manufacturer engineering process skill and information. Friday, May 28, 2010. Shipping carton drop/impact test. All the sub-components are delivery by air, ocean, or truck to destination. It is important to prevent the delivery parts without damage during transferring. Most of the packaging uses corrugated paper carton and cardboard to hold inside components and prevent it from damage by falling or throwing down by porter or carrier. Specification Apply to：. Gross weigh, m: The sum of masses of t...
manufacturing-engineer.blogspot.com
Manufacturing Engineer Blog: Notices for Screen-Printing on PET (PolyEthylene Terephthalate)
http://manufacturing-engineer.blogspot.com/2010/06/notices-for-screen-printing-on-pet.html
Sharing manufacturer engineering process skill and information. Sunday, June 6, 2010. Notices for Screen-Printing on PET (PolyEthylene Terephthalate). The PTF uses silkscreen to print the silver and carbon combination conductive inks on PET substitute to reach low cost purpose as compare with FPC. Unfortunately, the screen-printing has some ability limits. Especially for small trace width and small space. PTF: Polymer Thick Film. FPC: Flexibility Printing Circuit. If the particle come from inks then it m...
manufacturing-engineer.blogspot.com
Manufacturing Engineer Blog: January 2013
http://manufacturing-engineer.blogspot.com/2013_01_01_archive.html
Sharing manufacturer engineering process skill and information. Wednesday, January 2, 2013. Plastic boss crack of mold-in screw insert potential cause. Recently field complained our product had plastic house broken issue. As checked the defect parts and found the crack came from the screw boss till outside house. There is a mold-in screw INSERT part inside the boss. Below will list the screw boss crack potential causes:. 標籤： box build. Subscribe to: Posts (Atom). TQRDCE Performance Expectations and Review.
manufacturing-engineer.blogspot.com
Manufacturing Engineer Blog: The potential cause for HSC peel off defect
http://manufacturing-engineer.blogspot.com/2013/09/the-potential-cause-for-hsc-peel-off.html
Sharing manufacturer engineering process skill and information. Thursday, September 12, 2013. The potential cause for HSC peel off defect. Recently we found many missed segment defect for the HSC (Heat Seal Connector) solution LCM. As experience tell me the reliability of HSC bonding process is not good for the industrial product. It is easily to miss-contact between the PCB and HSC after a period of use. Below is the notice items I get from HSC supplier and expert:. Sometimes we will find there is misal...
manufacturing-engineer.blogspot.com
Manufacturing Engineer Blog: Plastic boss crack of mold-in screw insert potential cause
http://manufacturing-engineer.blogspot.com/2013/01/plastic-boss-crack-of-mold-in-screw.html
Sharing manufacturer engineering process skill and information. Wednesday, January 2, 2013. Plastic boss crack of mold-in screw insert potential cause. Recently field complained our product had plastic house broken issue. As checked the defect parts and found the crack came from the screw boss till outside house. There is a mold-in screw INSERT part inside the boss. Below will list the screw boss crack potential causes:. 1 Using re-grind resin. 3 Plastic molding parameter effect. If apply lower packing p...
manufacturing-engineer.blogspot.com
Manufacturing Engineer Blog: October 2010
http://manufacturing-engineer.blogspot.com/2010_10_01_archive.html
Sharing manufacturer engineering process skill and information. Friday, October 22, 2010. Metal dome with dimple as keypad solution. Last article I mentioned that my company applied the metal dome without dimple as keypad contact solution just like the cell phone but we met keypad press insensitive issue. Now we had solved the problem by adding the dimple back to the metal dome and still reach 1,000,000 times of finger press cycle lifetime. Subscribe to: Posts (Atom). Hot-Bar Flex cable Design Notices.
