plycyclemk2.blogspot.com
Plycycle Mk2This blog follows the building of a wooden framed bicycle, the Plycycle Mk2
http://plycyclemk2.blogspot.com/
This blog follows the building of a wooden framed bicycle, the Plycycle Mk2
http://plycyclemk2.blogspot.com/
TODAY'S RATING
>1,000,000
Date Range
HIGHEST TRAFFIC ON
Saturday
LOAD TIME
0.2 seconds
16x16
32x32
64x64
128x128
PAGES IN
THIS WEBSITE
19
SSL
EXTERNAL LINKS
0
SITE IP
74.125.228.235
LOAD TIME
0.239 sec
SCORE
6.2
Plycycle Mk2 | plycyclemk2.blogspot.com Reviews
https://plycyclemk2.blogspot.com
This blog follows the building of a wooden framed bicycle, the Plycycle Mk2
Plycycle Mk2: Fiddly bits.
http://www.plycyclemk2.blogspot.com/2014/09/fiddly-bits.html
This is my blog following the build of the PLYCYCLE Mk2, a wooden framed bicycle. Have a look at the original Plycycle here. I found a great selection of parts at Ceeway. Frame building supplies. I found two options so ordered both to test (and to fulfill their minimum order requirements) out mu options. Here are the two options. The two cable fixing options. Failed silver soldering attempts. So I set about spraying them up. I lightly roughed up the surface with wet and dry paper, then super glued li...
Plycycle Mk2: May 2015
http://www.plycyclemk2.blogspot.com/2015_05_01_archive.html
This is my blog following the build of the PLYCYCLE Mk2, a wooden framed bicycle. Have a look at the original Plycycle here. It occurred to me this morning that I had not actually put the wheels on the frame for a very long time. So I did. See the pic below. ThePlycycle Mk2 with wheels on. On the plus side the first thinned coat of varnish looks good and holds promise for the next full coat. Links to this post. Subscribe to: Posts (Atom). View my complete profile.
Plycycle Mk2: December 2014
http://www.plycyclemk2.blogspot.com/2014_12_01_archive.html
This is my blog following the build of the PLYCYCLE Mk2, a wooden framed bicycle. Have a look at the original Plycycle here. It is a frame! Before i mixed up the epoxy, I did a final dry assembly to check wheel alignment and that everything still fitted, and made some last minute trims and tweaks. One of the main things I did was to drill lots of very shallow holes and rough up the contacts surfaces on the parts to be bonded. I also had to abraid the insides of the metal tubing on the drop outs.
Plycycle Mk2: Bonding the main frame.
http://www.plycyclemk2.blogspot.com/2014/09/main-frame-epoxy-fix.html
This is my blog following the build of the PLYCYCLE Mk2, a wooden framed bicycle. Have a look at the original Plycycle here. Bonding the main frame. Like many of the steps in this project this bit was one was a one way journey, no going back. I had to join the two main halves of the frame together and bond the head tube and bottom bracket into place all in one go. There was no other way to do it. So after wetting up the two sides of the frame and the two metal components with straight West System. I am c...
Plycycle Mk2: November 2014
http://www.plycyclemk2.blogspot.com/2014_11_01_archive.html
This is my blog following the build of the PLYCYCLE Mk2, a wooden framed bicycle. Have a look at the original Plycycle here. Painting the metal drop outs. Drop outs tacked and ready to braze. Drop outs all brazed up. Drop outs all sprayed and lacquered. Links to this post. Cable holder trench and test placement. The other thing I have tackled recently is the seat post hole. On the Mk1 I really made a hash of the seat post, it was all on the wonk. Essentially because I rushed it. So this time ...I used a ...
TOTAL PAGES IN THIS WEBSITE
19
Plycraft Mr Chair Restoration
Plycraft Mr Chair Restoration. Thursday, March 11, 2010. Saturday, December 12, 2009. December 2, 2009. Yet another plycraft chair project. December 01, 2009. Subscribe to: Posts (Atom). Crazy italian into too many hobbies, from eames chairs to duck hunting.go figure. View my complete profile.
Plycraft Lounge Chair Restoration (Eames Lounger)
Plycraft Lounge Chair Restoration (Eames Lounger). How to restore a plycraft eames copy lounge chair. Thursday, May 31, 2012. Sunday, November 22, 2009. November 22, 2009. That’s a rap but a new project is on its way…. So today I rapped up the second chair, finished upholstery work and reassembled it. As for a breakdown of time here it goes;. Disassembly = 1 hour. Stripping/Sanding = 4 hours. Refinishing Ply = 8 hours (4 coats on each). Waxjob = 1 hour. Upholstery = 6 hours. Reassembly = 1 hour. I also w...
Plycrete Pumping, LLC - Home
Sarasota's finest concrete pumping service! Plycrete Pumping, LLC. To Schedule your next Pour!
Plycycle Mk2
This is my blog following the build of the PLYCYCLE Mk2, a wooden framed bicycle. Have a look at the original Plycycle here. First, it has been a while, more real life has just got in the way. The second time it was July and hot. The varnish went on much more thinly out of the tin and cured faster. It was also well within the recommended temperature all night too. The finish was great, as it was on the Plycycle Mk1, and as I had expected it to be in the first place. Links to this post. As a result of fit...
Paweł Łyczkowski - Home Page
Substance materials and other texturing resources. Subscribe to see what I'm currently working on. Screen recordings and demos.
PLyczkowski (Paweł Łyczkowski) | DeviantArt
Window.devicePixelRatio*screen.width 'x' window.devicePixelRatio*screen.height) :(screen.width 'x' screen.height) ; this.removeAttribute('onclick')". Digital Art / Professional. Paweł Łyczkowski. Sculpting has no exclusiv medium. Deviant for 12 Years. This deviant's full pageview. Paweł Łyczkowski. April 3, 1986. Sculpting has no exclusiv medium. This is the place where you can personalize your profile! By moving, adding and personalizing widgets. You can drag and drop to rearrange. Why," you ask? Wind B...
plyd.net | Isimtescil.net | Ücretsiz yapım aşamasında sayfası
Lütfen en kısa sürede tekrar ziyaret ediniz. Alan Adı kaydı ve hostingi IsimTescil.NET.
SOCIAL ENGAGEMENT