foam-machining.blogspot.com
EPS Foam machining: Foam cutting and machining services
http://foam-machining.blogspot.com/2009/08/machining.html
EPS and XPS foam machining using a CNC router. Foam cutting and machining services. EPS Foam machining of 1LB foam. The car was machined - glued and then using. A simple drywall mud, coated the foam. Now, a bit of sanding. And almost perfect results. Easter Island Statue made from 1LB EPS foam. Easter Island statue and a dragon by its side. Once done, the foam will be coated with Styrospray 1000. Which is a polyurethane coat, then painted. 8' Totam Pole - machined, but not coated. 1st of an EPS column.
berkeley-art-museum.blogspot.com
Berkeley Art Museum: BAM project
http://berkeley-art-museum.blogspot.com/2010/02/bam-project.html
Berkeley Art Museum project www.wecutfoam.com. Saturday, February 13, 2010. Berkeley, CA 94710 USA. Sunnyvale, CA 94089. The Berkley Art Museum project took 3 month to finish. With more then 160 pieces, most 8' in length. 3 months from start to finish. We started out with over 100 blocks of EPS 1LB foam. Foam being cut on the CNC hot wire foam cutter. EPS blocks after being cut on the CNC Hot wire. Each piece is covered with 1/8" plywood on both sides. And 1/4" wiggle wood from the top.