adcrete.com
Protective Coatings - Water Proofing, Enviroshield, Decorative Seal
http://www.adcrete.com/wp_trubond.htm
TRUBOND is a single pack, low viscosity resin solution containing hydrocarbon solvents. To prime porous and friable surfaces . Application is by brush, roller or spray gun. Clean up brushes, rollers and equipment in toluol or lacquer thinners. TRUBOND is flammable and should be used with adequate ventilation and kept away from heat, sparks and open flame. SHIPPING IDENTIFICATION Resin solution in flammable liquid. Group No. 3. UN No 1866 HAZCHEM 3 YE. 61 7 3883 1888. 61 7 3883 1777.
adcrete.com
Protective Coatings - Water Proofing, Enviroshield, Decorative Seal
http://www.adcrete.com/index_waterproofing.htm
To provide an attractive, decorative and functional waterproof membrane finish to protect structures against the environmental elements of rain and sun. This seamless, flexible waterproof membrane is ideally suited for use over roofing and decking or on walls subject to cracking and water penetration from wind driven rain. ADFLEX WBE is a water based membrane/moisture barrier coating. Approved for use with potable (drinking) water, independent testing confirms. ADFLEX WAM FR is a fibre reinforced single ...
adcrete.com
Protective Coatings - Water Proofing, Enviroshield, Decorative Seal
http://www.adcrete.com/index_floors.htm
To provide an economical, hard wearing surface finish to new or old, plain or coloured concrete and masonry surfaces. To penetrate and seal the surface to prevent dusting, resist staining, reduce corrosion and generally enhance the surface appearance. The faster than normal drying characteristics of GUARDSEAL allow treated surfaces to be used earlier. Resurfacer Black makes new, aged or worn asphalt new. Protects existing asphalt against further U.V. degradation. The application of Resurf...COLORPAVE has...
adcrete.com
Protective Coatings - Water Proofing, Enviroshield, Decorative Seal
http://www.adcrete.com/f_superm.htm
The bonding of new concrete to old concrete or other sound surfaces can be efficiently achieved by the use of SUPER M. SUPER M can be used for the repairing of concrete floors, spalled concrete, bedding tiles, waterproofing, lining of tanks, chemical and abrasion resistant floors. Wall rendering, Floor screeds and general concrete repairs, SUPER M excels. Compression Strength 69n/mm2 Tensile Strength 6.5/mm2 Flexural Strength 13n/mm2 Shrinkage 0.01% Chemical Resistance Resist mild acids alkalis, ...
adcrete.com.au
Protective Coatings - Water Proofing, Enviroshield, Decorative Seal
http://adcrete.com.au/index_waterproofing.htm
To provide an attractive, decorative and functional waterproof membrane finish to protect structures against the environmental elements of rain and sun. This seamless, flexible waterproof membrane is ideally suited for use over roofing and decking or on walls subject to cracking and water penetration from wind driven rain. ADFLEX WBE is a water based membrane/moisture barrier coating. Approved for use with potable (drinking) water, independent testing confirms. ADFLEX WAM FR is a fibre reinforced single ...
adcrete.com.au
Protective Coatings - Water Proofing, Enviroshield, Decorative Seal
http://adcrete.com.au/wp_trubond.htm
TRUBOND is a single pack, low viscosity resin solution containing hydrocarbon solvents. To prime porous and friable surfaces . Application is by brush, roller or spray gun. Clean up brushes, rollers and equipment in toluol or lacquer thinners. TRUBOND is flammable and should be used with adequate ventilation and kept away from heat, sparks and open flame. SHIPPING IDENTIFICATION Resin solution in flammable liquid. Group No. 3. UN No 1866 HAZCHEM 3 YE. 61 7 3883 1888. 61 7 3883 1777.
adcrete.com.au
Protective Coatings - Water Proofing, Enviroshield, Decorative Seal
http://adcrete.com.au/wp_adflex_wbe.htm
WATER BASED EPOXY MEMBRANE. ADFLEX WBE is a water based membrane/moisture barrier coating. Approved for use with potable (drinking) water, independent testing confirms. Conforms with the requirements of AS4020.2000 and BS6920. Water based - easy clean up using water. Non-flammable - low odour - easy to apply. Excellent adhesion to dry and damp surfaces including freshly laid (hardened) concrete. Cured membrane will withstand hydrostatic pressure. Good resistance to a wide range of chemicals. Colour: Grey...
adcrete.com.au
Protective Coatings - Water Proofing, Enviroshield, Decorative Seal
http://adcrete.com.au/wp_hydromat.htm
Mass per unit Area of Bentonite Mat: 6015 gm/m Thickness of Bentonite Mat: 6.5mm Mass per unit Area of Bentonite: 5500 gm/ m Tensile Strength: 11.2KN/m Adhesive Strength: 68cm California Bearing Ratio: 1.16KN Permeability: 8.64 X10-10cm/a Expansion Coefficient of Bentonite: 26.3ml/2g Moisture Content of Bentonite: 12% Loss of Liquidated Bentonite: 14.7ml Bentonite: Natural sodium based Bentonite. 61 7 3883 1888. 61 7 3883 1777. Adcrete Industries Pty Ltd (ABN 42 010 308 791) Queensland, Australia 4019.
adcrete.com.au
ADFLEX-ARM - long life flexible protective coating - UV resistant
http://adcrete.com.au/wp_adflex.htm
ADFLEX-ARM is a high build membrane coating formulated from premium grade Australian made acrylic emulsions and exhibits superior qualities of durability, cohesive strength, flexibility and water and weather resistance. Unlike other hard decorative surface finishes or interior coatings based on cheaper grades of emulsions, either heavily filled or low in volume solids, ADFLEX-ARM provides long life flexible protection with long lasting UV resistance. ADFLEX-ARM has a heavy thixotropic consistency with ex...
adcrete.com.au
Protective Coatings - Water Proofing, Enviroshield, Decorative Seal
http://adcrete.com.au/wp_adflex_pu.htm
ADFLEX PU 170 is a one component liquid polyurethane which cures to form a tough and permanently flexible waterproof membrane. One component, ready to use. Labour saving. Can be applied in a single application. High permanent flexibility. Seamless, imperious membrane. Excellent chemical resistance. Excellent adhesion to a wide range of substrates. Early access for follow up trades. No tar or bitumen modification. No bleed through. Non Flammable. Do not apply above 42ºC or below 8ºC ambient temperature...