raspberryalphaomega.org.uk
ARM Cortex – Raspberry Alpha Omega
http://raspberryalphaomega.org.uk/category/hardware/arm-cortex
Raspberry Pi from start to finish. Archive of posts filed under the ARM Cortex. Freescale Kinetis KwikStik (part 2). 13 July 2015, 9:26 pm. My previous post ended with me waiting for delivery of a surface-mount SWD connector so I could turn a Freescale Kinetis KwikStik K40 into a Segger J-Link compatible debug probe. I placed an order with Farnell UK for an appropriate connector, and it arrived the next day. Soldering the connector was surprisingly difficult. I had …. Filed under ARM Cortex. ARM Cortex-M...
raspberryalphaomega.org.uk
hardware – Raspberry Alpha Omega
http://raspberryalphaomega.org.uk/category/hardware
Raspberry Pi from start to finish. Archive of posts filed under the hardware. The time is UP! 16 June 2016, 1:54 pm. Followers of this blog will know that I have an interest in the whole ecosystem of Raspberry Pi “compatible” boards. By now I have quite a selection. Mostly, the boards I have in my collection are ARM-based, often using a System-on-Chip (SOC) from AllWinner rather than the Broadcom devices used by the official Raspberry Pi …. Continue reading ‘The time is UP! Rsquo; ». 13 July 2015, 9:26 pm.
raspberryalphaomega.org.uk
Freescale Kinetis KwikStik (part 2) – Raspberry Alpha Omega
http://raspberryalphaomega.org.uk/2015/07/13/freescale-kinetis-kwikstik-part-2
Raspberry Pi from start to finish. Freescale Kinetis KwikStik (part 2). 13 July 2015, 9:26 pm. Ended with me waiting for delivery of a surface-mount SWD connector so I could turn a Freescale Kinetis KwikStik K40 into a Segger J-Link compatible debug probe. I placed an order with Farnell UK for an appropriate connector. And it arrived the next day. After reading up, it seems that I might have had better luck had I spread on some extra flux, rather than just relying on the flux core in the solder. Dependin...
raspberryalphaomega.org.uk
Our Software – Raspberry Alpha Omega
http://raspberryalphaomega.org.uk/our-software
Raspberry Pi from start to finish. I try to share as much of our software as possible. Here's how to get what is available:. The "main line" of the CORNELIUS operating system. Intended to be built, transferred to an SD Card and used to boot a Raspberry Pi - Mostly C and assembler at the moment,. A bare-metal example of flashing Morse code on the OK LED. Intended to be built, transferred to an SD Card and used to boot a Raspberry Pi - Mostly C and assembler at the moment,. Leave a Reply Cancel reply.
raspberryalphaomega.org.uk
iron – Raspberry Alpha Omega
http://raspberryalphaomega.org.uk/tag/iron
Raspberry Pi from start to finish. Archive of posts tagged iron. Freescale Kinetis KwikStik (part 2). 13 July 2015, 9:26 pm. My previous post ended with me waiting for delivery of a surface-mount SWD connector so I could turn a Freescale Kinetis KwikStik K40 into a Segger J-Link compatible debug probe. I placed an order with Farnell UK for an appropriate connector, and it arrived the next day. Soldering the connector was surprisingly difficult. I had …. Filed under ARM Cortex. The time is UP!
raspberryalphaomega.org.uk
Frank – Raspberry Alpha Omega
http://raspberryalphaomega.org.uk/author/frank
Raspberry Pi from start to finish. Archive of entries posted by Frank. The time is UP! 16 June 2016, 1:54 pm. Followers of this blog will know that I have an interest in the whole ecosystem of Raspberry Pi “compatible” boards. By now I have quite a selection. Mostly, the boards I have in my collection are ARM-based, often using a System-on-Chip (SOC) from AllWinner rather than the Broadcom devices used by the official Raspberry Pi …. Continue reading ‘The time is UP! Rsquo; ». 1 June 2016, 3:02 pm. My pr...
raspberryalphaomega.org.uk
Freescale – Raspberry Alpha Omega
http://raspberryalphaomega.org.uk/category/hardware/freescale
Raspberry Pi from start to finish. Archive of posts filed under the Freescale. Freescale Kinetis KwikStik (part 2). 13 July 2015, 9:26 pm. My previous post ended with me waiting for delivery of a surface-mount SWD connector so I could turn a Freescale Kinetis KwikStik K40 into a Segger J-Link compatible debug probe. I placed an order with Farnell UK for an appropriate connector, and it arrived the next day. Soldering the connector was surprisingly difficult. I had …. Filed under ARM Cortex. The time is U...
raspberryalphaomega.org.uk
Segger – Raspberry Alpha Omega
http://raspberryalphaomega.org.uk/tag/segger
Raspberry Pi from start to finish. Archive of posts tagged Segger. Freescale Kinetis KwikStik (part 2). 13 July 2015, 9:26 pm. My previous post ended with me waiting for delivery of a surface-mount SWD connector so I could turn a Freescale Kinetis KwikStik K40 into a Segger J-Link compatible debug probe. I placed an order with Farnell UK for an appropriate connector, and it arrived the next day. Soldering the connector was surprisingly difficult. I had …. Filed under ARM Cortex. 10 July 2015, 11:09 am.
raspberryalphaomega.org.uk
surface mount – Raspberry Alpha Omega
http://raspberryalphaomega.org.uk/tag/surface-mount
Raspberry Pi from start to finish. Archive of posts tagged surface mount. Freescale Kinetis KwikStik (part 2). 13 July 2015, 9:26 pm. My previous post ended with me waiting for delivery of a surface-mount SWD connector so I could turn a Freescale Kinetis KwikStik K40 into a Segger J-Link compatible debug probe. I placed an order with Farnell UK for an appropriate connector, and it arrived the next day. Soldering the connector was surprisingly difficult. I had …. Filed under ARM Cortex. The time is UP!
raspberryalphaomega.org.uk
solder – Raspberry Alpha Omega
http://raspberryalphaomega.org.uk/tag/solder
Raspberry Pi from start to finish. Archive of posts tagged solder. Freescale Kinetis KwikStik (part 2). 13 July 2015, 9:26 pm. My previous post ended with me waiting for delivery of a surface-mount SWD connector so I could turn a Freescale Kinetis KwikStik K40 into a Segger J-Link compatible debug probe. I placed an order with Farnell UK for an appropriate connector, and it arrived the next day. Soldering the connector was surprisingly difficult. I had …. Filed under ARM Cortex. 20 June 2013, 6:39 pm.