exometindia.com
Exomet Foundry Products
http://www.exometindia.com/mastab.html
MASTAB: Master Alloying Tablets. Exomet Mastab is a concentrated alloying tablet for aluminium industries with highly effective alloying additives. Each tablet contains a specific weight of high purity element for alloying and the balance being a sodium free catalyst, which disintegrates faster. Recovery of element is high. To achieve alloying of Aluminium melt in normal melting temperature. Characteristics at a glance:. Available in tablet form. Weight: 1.280 Kgs ( /- 10 gms). Pick Up of element.
exometindia.com
Exomet Foundry Products
http://www.exometindia.com/insulatingr.html
EXOSHAPE 5000: Insulating Riser. To achieve increased feeding efficiency and extended solidification time for the riser metal. Characteristics at a glance:. Colour: white to off white. Shapes: Cylindrical, Conical, Slabs. Type: Open and Blind. Density: 0.35 to 0.60 gm/cc. Nature: Non wetting, Non hygroscopic. Extends the solidification time of feeder by 2 2.5 times compared to conventional risers and thereby reduces feed metal requirement. Reduces contact area , thereby reduces fettling cost.
exometindia.com
Exomet Foundry Products
http://www.exometindia.com/insulatinght.html
To achieve efficient feeding for rejection free ingot casting. Characteristics at a glance:. Size: 100 mm to 700 mm. Shape: Square, Octagonal, Corrugated etc or as per customer requirement. Type: Inserted, Half inserted, Super imposed. Bulk density: 0.6 to 0.85 gm/cc. Moisture: 1.5% to 2.5% Max. Minimum heat loss from riser. No metal penetration, clean strip from risers. Very low feed metal requirement, about 15% to 18%reduction in that for conventional sand riser sizes. Products for Aluminium Industries.
exometindia.com
Exomet Foundry Products
http://www.exometindia.com/fuel.html
FUEL PLUS: Fuel Additive for Hydrocarbon Fuel. Is added to Fuel Oil in a ratio of 1 part of Fuel Plus. To 1000 parts of Hydrocarbon fuel i.e. FO, LDO or HSD, it promotes combustion, resulting in more released energy. From each unit of fuel burnt. Characteristics at a glance:. Appreance: Pale Brown liquid. Consistency: This is an easy flowing liquid of low viscosity. Solubility in water: Insoluble. C CST 1.26. Solubility in Hydrocarbon : A. Soluble in Furnace Oil. B. Soluble in Diesel/kerosene. C.
exometindia.com
Exomet Foundry Products
http://www.exometindia.com/degasser.html
ALDEGAS 19 / 20: Degasser. To remove absorbed Hydrogen from Aluminium melt. Characteristics at a glance:. Available in tablet form. Weight: 50gm, 100gm, 250gm and 500gm. Minimizes hard spots and pin holes for easier machining. Produces casting with uniform and adequate mechanical properties. Aids to achieve polished finish, pinhole free suitable for plating and anodizing. Tablets of 50gm, 100gm, 250gm and 500gm available in 500gm and 1kg foil packets in 25kg cardboard boxes. Ceramic Lining for Furnace.
exometindia.com
Exomet Foundry Products
http://www.exometindia.com/Modifier.html
To modify Aluminium Silicon needle structure into homogeneous formation. Characteristics at a glance:. Grading: - 20 to dust. Moisture: 1% to 2%. Sodium. Base . Produces a fine silky structure. Develops maximum strength and ductility. 50 Kg in HDPE bags. Products for Aluminium Industries. Feeding modules for Steel Castings/Ingots. Products for Thermal Energy Management. Fuel Additive for Hydrocarbon Fuel. Ceramic Lining for Furnace. Paste and Module Form ).
exometindia.com
Exomet Foundry Products
http://www.exometindia.com/exothermicsr.html
EXOSHAPE E: Exothermic sleeve / Riser. To achieve efficient feeding for rejection free castings. Characteristics at a glance:. Dimension: Dia 25 mm to 750mm,. Type : Open, Blind, Doom and Oval. Moisture: 1.5% to 2% max. Bulk density: 0.55 to 0.8gm/cc. Sensitivity : 40 80 secs. for 1 inch cube at 1050°c depending upon riser dia. Permeability: 30 to 35. Free Aluminium: 15% to 25%. Minimum heat loss from riser. Requires negligible amount of heat for its burning. No Metal penetration, clean strip from risers.
exometindia.com
Exomet Foundry Products
http://www.exometindia.com/insulatings.html
EXOSHAPE I : Insulating sleeve / Riser. To achieve efficient feeding for rejection free castings. Characteristics at a glance:. Brown to dull brown colour. Dimension: Dia 25mm to 750mm, Height 150 or 300mm. Moisture: 1.5% to 2.5% max. Bulk density: 0.5 to 0.8gm/cc. Permeability: 35 to 45. Minimum heat loss from riser. No metal penetration, clean strip from risers. Highly resilient nature, can withstand shock and impact while jolting / squeezing. Supplied in prefabricated shapes. Ceramic Lining for Furnace.
exometindia.com
Exomet Foundry Products
http://www.exometindia.com/coverf.html
FLUXAL- 110: Cover Flux. To reduce Oxidation loss during melting of aluminium. Characteristics at a glance:. Grading: - 20 to dust. Moisture: 1% to 2%. Chlorides and Fluorides Base. Prevents Oxide build-up on furnace wall. Increases fluidity of metal, economical and safe to use. 50 Kg in HDPE bags. Products for Aluminium Industries. Feeding modules for Steel Castings/Ingots. Products for Thermal Energy Management. Fuel Additive for Hydrocarbon Fuel. Ceramic Lining for Furnace. Paste and Module Form ).